Proper snowmobile maintenance will spare you from the expensive breakdowns that come with the season. Call Select Synthetics in Geraldton at (807) 853-0807 and ensure a safe and enjoyable winter riding experience using AMSOIL products.

As winter approaches, the anticipation of hitting the snowy trails on your trusty snowmobile builds excitement. However, before embarking on those thrilling winter adventures, it's best to take things slowly and ensure your snowmobile is in top-notch condition. Proper snowmobile maintenance is key to a safe and enjoyable ride, so if you think there's room for improvement in your upkeep routine, get ready to improve snowmobile maintenance with this step-by-step guide.

Pre-Season Inspection

Before the snow starts falling, conduct a thorough pre-season inspection to identify any potential issues and address them before hitting the trails.

1. Check the Track: Begin by inspecting the track for any visible wear, tears, or missing studs. A damaged track can significantly affect your snowmobile's performance and safety.
2. Examine the Skis: Inspect the skis for cracks, bends, or any signs of wear. Ensure that the carbides are in good condition, as they're paramount in steering and stability.
3. Inspect Suspension Components: Check the suspension components, including shocks, springs, and bearings. Look for leaks, rust, or any other signs of damage that may compromise the sled's handling.
4. Review the Drive Belt: Examine the drive belt for wear and tear. A damaged or worn-out belt can lead to poor performance and even a breakdown on the trail.
5. Check the Brakes: Inspect the brake system, including brake pads and discs. Ensure that the brake fluid is at the recommended level and that there are no leaks.
6. Inspect the Engine: Check the engine for any visible leaks too, loose bolts, or damaged components. Change the oil and replace the oil filter if necessary. Ensure that the coolant level is appropriate for winter temperatures.

Fluids and Lubrication

Proper lubrication is crucial for the smooth operation of your snowmobile. In cold weather, it's essential to use fluids that can withstand low temperatures.

1. Engine Oil: Use a high-quality synthetic oil that is suitable for low temperatures to improve snowmobile maintenance. Change the oil according to the manufacturer's recommendations to maintain a smooth operation.
2. Coolant: Ensure that the coolant in your snowmobile is appropriate for winter temperatures. Antifreeze is important to prevent the coolant from freezing in cold conditions.
3. Grease Moving Parts: Lubricate all moving parts, including suspension components, steering components, and pivot points. Greasing these parts helps reduce friction and ensures smooth operation.

Contact Select Synthetics in Geraldton at (807) 853-0807 and keep your snowmobile in peak condition with the most advanced oil formulas on the market.

Battery and Electrical System

Cold temperatures can be harsh on your snowmobile's battery and electrical system. Taking proactive steps to maintain these components can prevent starting issues in the winter.

1. Check the Battery: Inspect the battery for corrosion, and clean the terminals if necessary. Ensure that the battery is fully charged, and consider using a battery tender during storage.
2. Inspect Spark Plugs: Check the spark plugs for wear and replace them if required. Properly gapped and clean spark plugs are essential for efficient combustion.
3. Test Lights and Electrical Components: Verify that all lights, including headlights and taillights, are working correctly. Test the hand warmers, thumb warmers, and other electrical components to ensure they function as intended.

Storage and Off-Season Care

When winter is over, proper storage practices can extend the life of your snowmobile and make it easier to prepare for the next season.

1. Stabilize Fuel: Add a fuel stabilizer to the gas tank to prevent the fuel from deteriorating during storage. Run the snowmobile for a few minutes to circulate the stabilized fuel through the system.
2. Store in a Dry Location: Store your snowmobile in a dry, cool location to prevent rust and corrosion. Consider using a breathable cover to protect it from dust while allowing moisture to escape.
3. Elevate the Track: To prevent flat-spotting of the track, lift the rear of the snowmobile off the ground or place it on a set of dollies.
4. Prepare for Summerization: Follow the manufacturer's recommendations for summerization, which may include fogging the engine, stabilizing the fuel system, and other preventive measures.

Whether you're a seasoned rider or a newcomer to the world of snowmobiling, AMSOIL is proven to improve snowmobile maintenance. Use Interceptor Synthetic 2-Stroke Oil to reduce exhaust smoke, and deliver superior wear protection. Dial (807) 853-0807 the oil pros at Select Synthetics in Geraldton will prepare your order ASAP so you can enjoy the thrill of the snowy trails without delay!